product description
Product Line: Torque Multipliers
- The reduced diameter allows for better access, especially on pipe flanges.
- Response from high strength spline.
- The reaction foot can slide on the spline to allow for sockets of varying lengths.
- Anti-tightening ratchet is available on all models (except 5:1 ratio) to make operation safer and more practical.
- The HT45 has an integral angle protractor to facilitate torque and angle tightening.
Think safe
The manufacturer's load and stroke ratings are maximum safe limits. Good practice encourages using only 80% of these ratings!
Product Samples
Size
Product Series
| model | Torque range(Nm) | Torque range (lbf.ft) | Torque ratio | Input side drive | Output side drive | Dimension A(mm) | Dimension B(mm) | Dimension C(mm) | Minimum size D(mm) | Maximum size D(mm) | Weight(Kg) | Reaction arm weight (Kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HT30/5 | 3000 | 2200 | 5:01 | 3/4" | 1 " | 108 | 192 | 140 | 224.2 | 252.4 | 5 | 2 |
| HT30/15 | 3000 | 2200 | 15:01 | 1/2" | 1 " | 108 | 210.9 | 140 | 243.2 | 271.4 | 7 | 2 |
| HT30/25 | 3000 | 2200 | 25:01:00 | 1/2" | 1 " | 108 | 210.9 | 140 | 243.2 | 241.4 | 7 | 2 |
| HT45/26 | 4500 | 3300 | 26:01:00 | 1/2" | 1 " | 108 | 228 | 174 | * | 322 | 8.7 | 4 |
| HT60/25 | 6000 | 4400 | 25:01:00 | 1/2" | 1 1/2" | 119 | 256 | 174 | 311.5 | 337 | 10.6 | 4 |
| HT60/125 | 6000 | 4400 | 125:01:00 | 1/2" | 1 1/2" | 119 | 284.7 | 174 | 340.5 | 366 | 12.1 | 4 |
