product description
Product Line: Hydraulic Puller Kits
- Versatile puller kit facilitates safe and easy removal in a variety of applications
- Hydraulic spindle for quick and easy disassembly
- High load rating of 100 kN (11.2 US tons)
- Power Retractor with two different arm lengths up to 120 mm (4.7 in)
- Depending on space and application requirements, claw pullers can be assembled as three-arm or two-arm pullers
- Powerful back puller behind the bearing inner ring clamps securely, reducing the force required to remove the bearing
- Comes with an extension rod to quickly adapt to pull lengths up to 245 mm (9.6 in)
- The spring-loaded center point of the hydraulic spindle allows easy puller centering, minimizing the risk of shaft damage
Think safe
The manufacturer's load and stroke ratings are maximum safe limits. Good practice encourages using only 80% of these ratings!
Product Samples
Product Series
| Brand | TMHC 110E | |
|---|---|---|
| Description | Advanced Hydraulic Puller Kits | |
| General purpose overall assessment | Message | 1 x Arm assembly bracket |
| 3 x Arm, Set 1 (TMHP10E-9) | ||
| 3 x Arm, Set 2 (TMHP10E-10) | ||
| 1 x Splitter Kit | ||
| 1 x Beam | ||
| 2 x Main rod | ||
| 2 x Extension rods, 125 mm (4.9 in) | ||
| 1 x Hydraulic spindle TMHS 100 | ||
| 2 x hydraulic spindle extensions; 50, 100 mm (2.0, 3.9 in) | ||
| 1 x objective lens turret with hydraulic spindle center point | ||
| Maximum stroke | 80mm (3.1 in) | |
| Nominal labor force | 100 kN (11.2 US tons force) | |
| weight | 13,5 kg (29.8 lbs) | |
| Hydraulic cylinder cycle life | Minimum 5000 cycles, maximum 100 kN (11.2 US tons force) | |
| Tapping hydraulic cylinder | UN 1½” x 16 tpi | |
| Safety valve setting hydraulic cylinder | 105 kN (11.8 US tons force) | |
| Suitcase size | 580 x 410 x 70 mm (23 x 16 x 2.8 in) | |
| Jaw puller | Effective arm length, arm set 1 (TMHP10E-9) | 65mm (2.5 in) |
| Grip Width, Arm Set 1 | 50-110 mm (2-4.3 in) | |
| Claw height | 8mm (0.3 in) | |
| Effective arm length, arm set 2 (TMHP10E-10) | 115mm (4.5 in) | |
| Grip Width, Arm Set 2 | 75-170 mm (2.9-6.7 in) | |
| Claw height | 8mm (0.3 in) | |
| Strong puller | maximum range | 250mm (9.8 in) |
| Shaft diameter range | 20 – 100 mm (0.8 – 4 in) |
