product description
Product Line: LGHMS Series
- All LGHMS series main puller kits include: LGH series puller, cross puller, bearing separator, bearing race puller, removable hollow cylinder, hose, pressure gauge, and hydraulic pump.
- The LGH series pullers offer the same safety and ease of use as mechanical pullers, applying pulling force via a standard 10,150 psi hydraulic cylinder.
- It can be quickly and easily installed in a variety of application scenarios.
- Hydraulic drive lifts pulling force, reducing operator fatigue.
- The locking jaws ensure a secure grip, making operation safe and effortless.
- Synchronized jaw movement allows a single person to complete the entire removal and unloading operation.
- If a center hole is not pre-drilled at the shaft end, the LGH series puller must be used in conjunction with...
- Use of a tip protector. Each puller kit comes with a tip protector.
- Use of a tip protector. Each puller kit comes with a tip protector.
- Our hydraulic cylinders and pumps can withstand a working pressure of 10,150 psi, but when used with cross-bearing puller assemblies, the operating pressure must not exceed 5,000 psi.
Think safe
The manufacturer's load and stroke ratings are maximum safe limits. Good practice encourages using only 80% of these ratings!
Product Samples
Product Series
| Puller kit model | Hydraulic puller load capacity (US ton) | Hydraulic three-jaw puller model | Maximum capacity accessories (US ton) | Cross bearing puller model | Bearing separator model | Bearing race puller model | Weight (Kg) |
|---|---|---|---|---|---|---|---|
| LGHMS310H | 10 | LGH310 | 7 | BHP112 | BHP181 | BHP180 | 35 |
| LGHMS314H | 14 | LGH314 | 7 | BHP172 | BHP282 | BHP190 | 46 |
| LGHMS324H | 24 | LGH324 | 12 | BHP272 | BHP292 | BHP280 | 90 |
| LGHMS364H | 64 | LGH364 | 25 | BHP672 | BHP682 | BHP580 | 230 |
The hydraulic puller can operate at pressures up to 700 bar. When using accessories, the hydraulic pressure must be limited to the following maximum capacity range.
Cross bearing puller model (mm) | Bearing separator model (mm) | Bearing race puller model (mm) | ||||||||||||||
| Model No. | A | B min | Thread Size C | Weight (Kg) | Model No. | A | B min | B max | Thread Size C | Weight (Kg) | Model No. | A | B | C min | C max | Weight (Kg) |
| BHP112 | 280 | 115 | ⅝”-18 UNF | 2 | BHP181 | 110 | 10 | 110 | ⅝”-18 UNF | 2.8 | BHP180 | 135 | 236 | 40 | 145 | 2 |
| BHP172 | 280 | 115 | ⅝”-18 UNF | 2.2 | BHP282 | 156 | 12 | 134 | ⅝”-18 UNF | 5.7 | BHP190 | 164 | 265 | 40 | 145 | 2 |
| BHP272 | 370 | 140 | ⅝”-18 UNF | 2.4 | BHP292 | 182 | 13 | 210 | ⅝”-18 UNF | 12.5 | BHP280 | 164 | 265 | 40 | 145 | 2.4 |
| BHP672 | 615 | 220 | 1¼”-12 UNF | 6.4 | BHP682 | 300 | 20 | 300 | 1¼”-12 UNF | 43.5 | BHP580 | 150 | 310 | 60 | 240 | 6.4 |
