product description
Product Line: Bearing Puller Kits
- Puller Top Grip Puller Kits provide precise hydraulic control for fast, efficient and safe pulling
- High-quality forged steel components provide exceptional reliability and service
- Including hydraulic device
- WARNING When using a double crosshead (50 jaws) or using the puller legs with the bearing puller attachment, do not exceed 2% of the rated pulling capacity.
Think safe
The manufacturer's load and stroke ratings are maximum safe limits. Good practice encourages using only 80% of these ratings!
Product Series
| model | Capacity/ton | Working pressure/Mpa | Hand Pump | Cylinder | hose | Measurement | Gauge adapter | handle | Weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| BHP152 | 8 | 70 | P142 | RCH121 | JH7818 | GF120B | GA4 | BHP1762 | 22 |
| BHP251G | 20 | 70 | P392 | RCH202 | JH7818 | GF813B | GA3 | BHP252 | 56 |
| BHP351G | 30 | 70 | P392 | RCH302 | JH7818 | GF813B | GA3 | BHP352 | 91 |
| BHP551G | 50 | 70 | P80 | RCH603 | JH7818 | GF813B | GA3 | BHP552 | 160 |
| Pulling capacity | ton | 11 ton | 16 ton | 22 ton | |
| Claw puller part number | BHP-162 1) | BHP-261G | BHP-361G | BHP-561G | |
| Weight of hydraulic components included (Kg) | 26 | 62 | 121 | 185 | |
| Hand Pump | P-142 | P-392 | P-392 | P-80 | |
| Liquid Cylinder | RCH-121 | RCH-202 | RCH-302 | RCH-603 | |
| Saddle | - | HP-2015 | HP-3015 | HP-5016 | |
| hose | HB-7206QB | HC-7206 | HC-7206 | HC-7206 | |
| pressure gauge | GF-120B | GF-813B | GF-813B | GF-813B | |
| Pressure gauge seat | GA-4 | GA-3 | GA-3 | GA-3 | |
Cross positioning puller2) | model | BHP-1772 | BHP-262 | BHP-362 | BHP-562 |
| Tension(mm) | maximum | 260 | 345 | 440 | 580 |
| Minimum | 115 | 140 | 180 | 220 | |
| Reach(mm) | maximum | 357 | 570 | 710 | 864 |
| Adjusting screw(mm) | 直径 | 3/4″-16 UNF | 1″-8UNC | 1-1/4″-7UNC | 1-5/8″-5.5UNS |
| length | 400 | 670 | 790 | 975 | |
Tie rod(mm) | length | 105 | 115 | 205 | 609 |
| length | 357 | 240 | 460 | 863 | |
| length | - | 420 | 710 | - | |
| length | - | 520 | - | - | |
| Tie rod upper end (mm) | thread | 3/4″- 16 UNF | 3/4″- 16UNF | 1-14 UNS | 1 1/4″- 12 UNF |
| Lower end of tie rod(mm) | thread | 5/8″- 18 UNF | 5/8″- 18 UNF | 1-14 UNS | 1 1/4″- 12 UNF |
| Bearing sleeve puller | BHP-180 | BHP-280 | BHP-380 | BHP-580 | |
| Bearing puller | BHP-181 | BHP-282 | BHP-382 | BHP-582 | |
1) Including adapter FZ-1630.
2) Mechanical puller kit can be ordered separately.
